HOFA Colour Saturator 1.5 Adds a Mastering Category

HOFA Colour Saturator 1.5 adds a new Mastering category and 13 saturation models, pushing the neural-modeled plugin past 40 analog-derived flavors.

T
Theo Nakamura
November 22, 2026 · 8 min read
HOFA Colour Saturator saturation plugin interface with BiasEQ

Dubspot's best Black Friday dealsSM-1 SemiModular ↗Analog Bundle ↗Drum Programming Course $19 Regular price $99 ↗Tracker Pro $15 Regular price $24.99 ↗

HOFA released Colour Saturator 1.5 in November 2026, and the free update does more than tidy up. It adds a dedicated Mastering category and 13 new saturation models, taking the plugin past 40 analog-derived flavors. For a saturator that already modeled real hardware from HOFA's own studios, the new mastering-grade options are the headline.

At a glance: HOFA Colour Saturator is a saturation and distortion plugin for mixing and mastering, built on neural models of analog hardware. It runs as VST3, AU, and AAX on macOS 13 or later and Windows 10 or later. The full price is 129 EUR, version 1.5 is a free update for existing owners, and a 14-day trial is available. The 1.5 update adds a Mastering category and 13 new models, plus improved performance.

What is HOFA Colour Saturator?

Colour Saturator is a character plugin that colors audio with harmonic saturation, from gentle warmth to hard drive. HOFA, a German studio and plugin maker, built its models on neural captures of real hardware units from its own facility, so each setting carries the behavior of a specific tube, tape machine, preamp, or desk rather than a generic math curve. That's the pitch: analog character you can audition model by model inside the DAW.

What sets it apart from a one-knob saturator is control. The signal path pairs each model with a nine-band, fully parametric BiasEQ that decides how much each frequency range is saturated, an input stage with dynamics and a tilt EQ, optional wow and flutter and noise, post-saturation high and low cuts, and a dry/wet mixer for parallel processing. You get the color of vintage gear with the surgical control that software allows. For the opposite approach, Dubspot recently covered sonible pure:smooth, a tool that cleans a signal by tackling harsh resonance instead of adding harmonics.

What's new in Colour Saturator 1.5?

A dedicated Mastering category

The standout addition is a new Mastering saturator category with four models built for the master bus: Bright Tube Master, Tube Enhance Master, Pentode Master, and Triode Master. Mastering saturation is a different job from track-level coloring. It needs to add density, glue, and a touch of air without smearing transients or crowding the stereo image. By grouping dedicated mastering models, HOFA signals that Colour Saturator is now meant to sit on the 2-bus, not just on a snare or a vocal.

Thirteen new models across the board

Beyond the mastering set, version 1.5 spreads nine more models across the existing families. The preamp group gains a Sparkle Tube PreAmp and a Warm Tube PreAmp for front-end color. The tape family grows the most, adding Glue Tape, Round Tape, PreAmp + Tape, Transformer Tape, and Fat Tape, which together cover everything from subtle cohesion to thick, weighty low end. The catch-all category picks up Studio Tubes and a Blue FET Compressor flavor. More models means more starting points, and each one is a specific sound, not a vague preset.

Improved performance

HOFA also lists improved performance in 1.5, which matters when you're stacking several instances across a session or running a mastering model that leans on heavier processing. A saturator earns its place on many channels only if it stays light, and the optimization pass is aimed squarely at that.

How Colour Saturator works

The workflow is model first, then shape. You pick a saturation model, set the drive with Soft or Hard calibration, then use the BiasEQ to steer the harmonics where you want them, for example warming the low mids while keeping the top end clean. The input section can tighten dynamics and tilt the tone before saturation, while wow, flutter, and noise add vintage instability when you want it. Post-saturation cuts clean up mud and fizz, and the dry/wet control lets you blend parallel saturation for density without losing clarity. It's a deep plugin that still reads clearly on screen.

Colour Saturator specifications

SpecDetail
TypeSaturation and distortion plugin (mixing and mastering)
ModelingNeural models of analog hardware from HOFA's studios
Model countMore than 40 across eight categories after 1.5
CategoriesMastering, Mic PreAmps, Tape, Git/Bass Amp, Pedals, Pedal + Amp, Other, Legacy
Tone controlNine-band fully parametric BiasEQ per model
Input stageDynamics, tilt EQ, wow and flutter, noise and hum
RoutingPost-saturation high and low cut, dry/wet mixer for parallel saturation
Drive modesSoft and Hard calibration
FormatsVST3, AU, AAX
SystemsmacOS 13 or later, Windows 10 or later
Price129 EUR; 1.5 free for owners; 14-day trial

Colour Saturator vs FabFilter Saturn 2

The obvious comparison is FabFilter Saturn 2, the benchmark for multi-model, frequency-aware saturation.

HOFA Colour SaturatorFabFilter Saturn 2
ApproachNeural models of specific hardware unitsAnalog-modeled styles plus distortion types
Model countMore than 40 across eight categories28 distortion styles across tape, tube, amp, and more
Frequency controlNine-band parametric BiasEQMultiband saturation with up to six bands
ModulationInput dynamics, wow, flutter, noiseDeep modulation with XLFOs, envelopes, and followers
FormatsVST3, AU, AAXVST, VST3, AU, CLAP, AAX
Price129 EUR149 USD

They solve the same problem from different ends. FabFilter Saturn 2 wins on modulation and its multiband engine, so it's the pick if you want to animate saturation over time or carve it across the spectrum with per-band control. Colour Saturator counters with a bigger library of specific hardware voices plus the new mastering set. Reach for it when you want a named sound to start from and the BiasEQ to place it. If you want raw aggression instead, Soundtoys Decapitator remains the go-to, and the Black Box Analog Design HG-2 is the reference for tube glue on the mix bus. For the wider field, see our best saturation plugins guide.

Who Colour Saturator is for

Colour Saturator suits mixing and mastering engineers who want to pick a precise hardware flavor and then place its harmonics exactly, rather than dialing a generic warmth knob. The new mastering category makes it far more relevant to anyone finishing tracks, and the deep BiasEQ rewards engineers who like to work surgically. It's also a strong fit for producers chasing analog character without buying outboard.

It's less essential if you already own a saturator you trust and only need occasional warmth, where something like Softube Saturation Knob or a lo-fi tool such as RC-20 Retro Color covers the ground for less money or no money at all. Colour Saturator is the pick when you want range and precision together.

How much does Colour Saturator cost?

Colour Saturator is 129 EUR, and version 1.5 is a free update for existing owners, which is the easy part of the recommendation. HOFA discounts it during sale periods, so the current price is worth checking. A 14-day trial lets you test every model, including the new mastering set, before buying. You can download the trial or buy it from the official HOFA Colour Saturator page.

FAQ

Is Colour Saturator 1.5 a free update?

Yes. Version 1.5 is free for existing Colour Saturator owners. It adds a Mastering category, 13 new saturation models, and performance improvements.

What formats and systems does Colour Saturator support?

It runs as VST3, AU, and AAX on macOS 13 or later and Windows 10 or later. A 14-day trial version is available for both platforms.

How many saturation models does Colour Saturator have?

After the 1.5 update, Colour Saturator carries more than 40 models across eight categories, including the new Mastering group and additions to the tape and preamp families.

Colour Saturator or FabFilter Saturn 2?

Choose Colour Saturator for a large library of specific hardware voices and nine-band BiasEQ placement, now with dedicated mastering models. Choose FabFilter Saturn 2 if you want multiband saturation and deep modulation to move the effect over time.

First look verdict

This first look is based on HOFA's official materials and release notes, not an extended mastering session. On paper, version 1.5 is the update that moves Colour Saturator from a strong track-coloring tool to a credible mastering saturator. The four new master-bus models answer the one gap in the original release, the tape and preamp additions deepen a library that was already specific and musical, and the performance work keeps it usable across a full session. For engineers who want analog character with surgical frequency control, and especially those finishing tracks, Colour Saturator is now a more complete package, and the upgrade costs owners nothing.