LACIMA CS-01 Rebuilds Yamaha's 1982 CS01 as a Plugin

LACIMA CS-01 models the Yamaha CS01 and CS01 II monosynths in one plugin, with both filters, binaural mode, and an 8-voice option. Specs, price, and comparison.

M
Marcus Feld
November 16, 2026 · 9 min read
LACIMA CS-01 plugin panel modelled on the Yamaha CS01 monophonic synthesizer

Dubspot's best Black Friday dealsDubspot Tracker Pro: $15, was $24.99 ↗Drum Programming and Groove Production Course: $19, was $99 ↗

LACIMA DSP released CS-01 in early November 2026. It rebuilds two small Yamaha monosynths, the CS01 from 1982 and the CS01 II from 1984, inside a single plugin. A MODEL control swaps between the two machines even while a note is held, so you can hear one filter hand off to the other in real time.

At a glance: LACIMA CS-01 is a virtual analog monosynth for macOS and Windows, in VST3, AU (Mac only), and standalone. It models both the CS01 and the CS01 II, with their 12 dB and 24 dB filters, plus a binaural mode and an 8-voice polyphonic option the originals never had. It launches at 9 euros through December 8, 2026, then settles at 29 euros, and a free demo with no time limit lets you try the whole instrument first.

What is the Yamaha CS01?

The Yamaha CS01 was a budget monophonic synthesizer from 1982. It had mini keys, ran on batteries, and took a breath controller, which made it a portable sketchpad rather than a studio centerpiece. Under the playful exterior sat a real analog voice: a single oscillator, a resonant filter, an envelope, and an LFO. The CS01 II that followed in 1984 kept the format but swapped in a steeper 24 dB per octave filter for a thicker, more aggressive low end.

Those two machines have a small but devoted following because they sound bigger than their size suggests. LACIMA CS-01 is built around that reputation. Instead of picking one revision, it models both and lets you switch between them, so the plugin covers the lighter, reedier Mk I tone and the fatter Mk II tone from the same panel.

It lands in a crowded field of vintage analog emulations. For the broader picture of where it fits, our roundup of the best synth VST plugins maps the territory, and the best free synth VSTs guide covers what you can get without spending anything.

What LACIMA CS-01 does, control by control

The oscillator section keeps the original layout. A FEET control sets the octave from 32 foot down to 4 foot and adds a white noise option, and a WAVE control moves through triangle, sawtooth, square, pulse, and pulse width modulation. That's a wider waveform menu than the hardware shipped with, so the plugin has more range than a straight clone.

The filter is where the two models separate. The Mk I filter runs at 12 dB per octave with resonance on a Low and High switch, true to the gentler original. The Mk II filter runs at 24 dB per octave with a resonance slider that self-oscillates, so you can push it into a sine-like whistle and play the filter itself. Both share cutoff, envelope depth, and a dedicated breath depth control, and a KEY TRACK switch (off, I, or II) ties cutoff to pitch so the top of the keyboard stays open.

The envelope is a full ADSR that ranges from milliseconds to seconds, a step up from the simpler envelope on the hardware. An EG loop option restarts the envelope from its attack stage while a key is held, which turns the envelope into a rough second LFO for pulsing, rhythmic patches. The LFO itself is a single triangle running from 0.8 Hz up to 19.5 Hz, with an audio-rate mode that climbs to 2 kHz. At those speeds it crosses into FM-style territory and adds clangorous, metallic overtones that the slow setting can't reach.

Around these core sections, LACIMA adds modern touches. GLISSANDO slides between legato notes for up to six seconds, which is far longer than a normal portamento and good for slow, sliding leads. Stereo and Binaural modes widen the mono signal, and the binaural option in particular gives headphone listeners a sense of space. Breath control responds to MIDI CC 2, so a breath or expression controller drives filter and level the way the original hardware intended, and the sustain pedal is mapped to CC 64.

LACIMA CS-01 specifications

SpecLACIMA CS-01
TypeVirtual analog monosynth modelling the Yamaha CS01 and CS01 II
OscillatorFEET 32' to 4' plus noise; WAVE triangle, saw, square, pulse, PWM
Filter (Mk I)12 dB per octave, resonance Low/High switch
Filter (Mk II)24 dB per octave, self-oscillating resonance slider
EnvelopeADSR, milliseconds to seconds, with EG loop
LFOOne triangle, 0.8 to 19.5 Hz, audio-rate mode to 2 kHz
VoicingMonophonic, or 8-voice POLY mode
ExtrasGLISSANDO to 6 s, Stereo and Binaural modes, breath control (CC 2)
Presets23 factory for Mk I, 23 for Mk II, plus user presets
FormatsVST3, AU (Mac only), standalone, all 64-bit
PlatformsmacOS (Apple Silicon and Intel), Windows
LicenseTwo computers per key, 14-day refund
Price9 euros intro through December 8, 2026, then 29 euros

LACIMA CS-01 vs Baby Audio BA-1

The CS01 already has one well-known plugin tribute: Baby Audio's BA-1. Both start from the same 1982 hardware, but they aim at different players.

LACIMA CS-01Baby Audio BA-1
ConceptFaithful dual-model recreationCS01 reimagined as a creative tool
ModelsCS01 and CS01 II, switchable liveOne reinterpreted voice
Filter12 dB and 24 dB, both originalsSingle modeled filter
EffectsNone built in, dry synthReverb, chorus, delay, EQ, lo-fi character
ExtrasBinaural mode, 8-voice poly, breath controlArpeggiator, Re-Gen patch generator, 500+ presets
Price9 euros intro, 29 euros fullPremium tier, see Baby Audio for current sale

BA-1 is the pick if you want a finished creative instrument: it layers op-amp distortion, speaker simulation, a battery mode, an arpeggiator, and a large effects rack on top of the CS01 voice, and its Re-Gen button spits out tuned patches on demand. LACIMA CS-01 goes the other way. It keeps the signal path dry and close to the hardware, then deepens the synthesis with both filters, the longer envelope, the audio-rate LFO, and a polyphonic mode. If you want the raw CS01 and CS01 II to build from, LACIMA is the more purist and far cheaper route. If you want the CS01 as a springboard with effects baked in, BA-1 is the fuller box of tricks. For a different take on budget vintage character, TAL-U-NO-LX covers the Juno side, and the free Full Bucket FB-3 emulates classic Korg polysynths.

Who LACIMA CS-01 is for

This plugin suits producers who like small, characterful monosynths for bass, leads, blips, and effects, and who would rather shape a sound from a tight set of controls than scroll a thousand presets. The two filter models give it real range, so one instance can play a soft, woody bassline or a screaming self-oscillating lead. Anyone who owns a breath controller gets an instrument that was designed for one, which is rare.

It's a weaker fit if you need a modern workstation synth with wavetables, deep modulation, and a built-in effects chain. The flagship route there is something like Arturia Pigments, which trades vintage focus for sheer breadth. CS-01 is also not an AAX plugin, so Pro Tools users on that format are out for now. And because it's a single-oscillator design at heart, it won't cover thick supersaw or heavily detuned sounds without stacking instances.

How much does LACIMA CS-01 cost?

LACIMA CS-01 launched at an introductory price of 9 euros, which runs until 23:59 CET on December 8, 2026, a 69 percent cut from the regular 29 euros. After that window it returns to 29 euros. A license covers two computers per key, purchases are handled through Paddle, and there is a 14-day refund window. A free demo gives you the complete instrument with no time limit and no account; after two minutes of sound it plays a short burst of hiss roughly every 30 seconds until you activate a key, so you can test it fully in your own projects before deciding.

You can confirm current pricing and download the demo on the official LACIMA CS-01 page.

Check price at LACIMA DSP

FAQ

What is the difference between the CS01 and CS01 II?

The original Yamaha CS01 from 1982 used a 12 dB per octave filter for a gentler tone. The CS01 II from 1984 switched to a 24 dB per octave filter for a thicker, more aggressive sound. LACIMA CS-01 models both and lets you switch between them with the MODEL control, even mid-note.

Can LACIMA CS-01 play chords?

The original hardware was monophonic, but LACIMA added a POLY mode that gives you eight voices. You can run it as a faithful mono synth or open it up for pads and chords the CS01 could never play.

What formats and systems does it support?

CS-01 runs on macOS, with Apple Silicon and Intel support, and on Windows. It comes as a VST3 and standalone on both, plus Audio Units on macOS. All versions are 64-bit, and there's no AAX build.

Is there a free trial?

Yes. The demo is the full instrument with no time limit and needs no email or account. After two minutes of continuous sound it adds a burst of hiss about every 30 seconds until you enter a license key.

The verdict

This is a first look based on LACIMA's official materials, not a hands-on review. On paper, CS-01 is a smart way to package a cult synth. Rather than cloning one revision, it models both the CS01 and the CS01 II and lets them trade places live, then extends the design with a longer envelope, an audio-rate LFO, a binaural mode, and eight voices of polyphony. At 9 euros during the intro window, with a no-strings demo to test first, it's an easy instrument to audition. Go in expecting a focused single-oscillator monosynth with genuine vintage character, not a do-everything flagship, and it looks like a lot of synth for the money.