soothe3
oeksound
soothe3 is oeksound's dynamic resonance suppressor, adding a single Detail knob, an adaptive Soft mode, and low-latency processing over soothe2.
The sequel done right: soothe3 keeps soothe2's celebrated suppression engine and fixes the workflow, with a single Detail knob, an adaptive Soft mode, and true low-latency processing.
Ideale per: Mixing and mastering engineers who fight harshness and resonance on vocals, guitars, cymbals, and full masters and want faster, more precise control.
Pros
- New Detail knob replaces soothe2's sharpness and selectivity for intuitive tuning
- Adaptive-threshold Soft mode sounds cleaner on dynamic sources like vocals
- Low-latency mode hits zero samples at base rates, so it works while tracking
- Node editing, eight band shapes, tilt, and max cut allow surgical targeting
Cons
- Still CPU-hungry, especially with linear phase or high-quality settings
- Easy to over-process and dull a mix if pushed too hard
- No Windows ARM support
Panoramica
soothe3 is oeksound's dynamic resonance suppressor and the successor to soothe2, released on May 19, 2026. It solves the same problem that made its predecessor a modern staple: harsh resonances, sibilance, and ringing plague nearly every source, from vocals and acoustic guitars to overheads and full masters. Instead of hunting for those peaks by hand and notching them with a dynamic EQ, soothe3 scans the signal in real time and ducks problem frequencies only when and where they spike. The result is a smoother, more polished sound that keeps the tone intact.
The upgrade is about control rather than a new engine. soothe2 split the reduction character across two overlapping controls, sharpness and selectivity. soothe3 folds them into a single Detail knob that oeksound calls the biggest improvement in the release. Tuning is faster and, on vocals especially, smoother across the range. A new adaptive-threshold Soft mode tracks the level of dynamic sources, while Hard mode preserves soothe2's fixed-threshold behavior and the popular sidechain trick.
Two practical additions stand out. A low-latency mode reports zero samples at base sample rates and around 1 ms at higher rates, so soothe3 is finally comfortable to run while tracking. And deeper editing — create and delete nodes, choose from eight band shapes including bandpass and tilt, then set tilt, max cut, and linear phase — turns broad suppression into precise sculpting. A collapsible side panel keeps the everyday view clean.
The trade-offs are familiar. soothe3 is CPU-hungry, particularly with linear phase or high-quality settings on a busy session, and it is easy to overuse; lean on it too hard and a mix loses air along with the harshness. There is no Windows ARM support.
Against its alternatives, soothe3 holds a distinct lane. Soundtheory's Gullfoss is a broadband tonal balancer rather than a targeted suppressor, and iZotope's Ozone 11 is a full mastering suite, not a dedicated resonance tool. Choose soothe3 when your specific problem is resonance and you want the sharpest tool for it. oeksound sells it directly through its own store, with a fully featured 20-day trial and a generous free upgrade for recent soothe2 owners.
Specifiche
- Plugin type
- Dynamic resonance suppressor
- Release date
- May 19, 2026
- Price
- $259 / €229 / £199
- Formats
- VST3, AU, AAX (Pro Tools 2018.1+)
- Architecture
- 64-bit only; no Windows ARM
- Operating systems
- Windows 10-11; macOS 10.14 Mojave through macOS 26 Tahoe (Apple Silicon native; Intel through macOS 15)
- Processing modes
- Soft mode (adaptive threshold) and Hard mode (fixed threshold)
- Channel support
- Mono through 9.1.6 immersive
- Latency
- Low-latency mode: 0 samples at base rates, ~1 ms at higher rates
- Notable controls
- Detail knob, tilt, max cut, linear phase, eight band shapes, node editing
- Trial
- Fully featured 20-day trial
Ultima verifica 2026-07-09
FAQ
What does soothe3 do?
soothe3 is a dynamic resonance suppressor. It scans the signal in real time, detects resonant peaks as they spike, and reduces those frequencies only when they misbehave, removing harshness and sibilance while keeping the tone intact.
How much does soothe3 cost?
soothe3 costs $259 / €229 / £199 direct from oeksound. Upgrading from soothe2 is $55 / €50 / £45, and it is free for anyone who bought soothe2 on or after February 18, 2026. A rent-to-own plan runs $14.90 per month across 18 payments.
What is new in soothe3 compared to soothe2?
soothe3 replaces soothe2's sharpness and selectivity controls with a single Detail knob, adds an adaptive-threshold Soft mode, and introduces a low-latency mode. It also adds node editing, eight band shapes, tilt and max cut controls, linear phase processing, and immersive channel support up to 9.1.6.
What formats and systems does soothe3 support?
soothe3 is available in VST3, AU, and AAX (Pro Tools 2018.1 and up). It is 64-bit only with no Windows ARM support, and runs on Windows 10-11 and macOS 10.14 Mojave through macOS 26 Tahoe, with native Apple Silicon support and Intel support through macOS 15.
Concorrenti diretti
soothe3 vs — head-to-head specs, price, and Dubspot Score.