Forever 89 miniFM (2026): Three-Operator FM Synth, €79

Forever 89 miniFM puts three FM operators, an analogue-modelled filter and per-voice reverb on one panel. €79 intro to 17 Dec, then €119. VST3 and AU.

T
Theo Nakamura
November 20, 2026 · 10 min read
Forever 89 miniFM single-panel interface with three FM operators, mixer, low-pass filter, modifier matrix, two contour envelopes, RP-8 reverb, preset display and on-screen keyboard

Dubspot's best Black Friday dealsDubspot Tracker Pro: $15, was $24.99 ↗Drum Programming and Groove Production Course: $19, was $99 ↗

miniFM is a three-operator FM synthesizer from Forever 89, released on 19 November 2026 for macOS and Windows. The company behind the Visco sample-modelling drum machine and the Topos amp, speaker and saturation effect sums up the idea as "1970, meet 1983": the immediacy of a classic monosynth front panel wrapped around the depth of FM. Oscillators become operators, octave ranges become harmonics, and waveform switches become FM amounts. It costs €79 until 17 December 2026, then €119.

At a glance: three-operator FM synth with one fixed algorithm and operator feedback; Harmonic Interpolation engine for smooth sweeps between harmonic and metallic tones; detailed emulation of a classic 1970s-inspired analogue low-pass filter with self-oscillation; per-voice RP-8 reverb; modulation matrix with Key, Velocity, Wheel, LFO and Flux rows; mono or 16-voice polyphony; Patch Map and infinite random patch generator. VST3 and AU, macOS and Windows. €79 intro to 17 Dec, €119 after, time-unlimited demo, no subscription or dongle. FM programming made as direct as a monosynth.

What is Forever 89 miniFM?

FM synthesis has a reputation problem. It produces some of the most vivid sounds in electronic music, from glassy electric pianos to snarling basses and bell tones, but classic FM instruments hid that power behind six operators, 32 algorithms and a small display.

miniFM takes the opposite approach. It strips FM back to three operators in a single, fixed signal path and lays every control out on one panel, for hands-on patch editing. Operator 1 can feed back into itself, Operator 1 modulates Operator 2, Operator 2 modulates Operator 3, and all three feed a mixer ahead of the filter. That chain is enough for the core FM vocabulary: a feedback-enriched tone on Operator 1, a modulated layer on Operator 2 and a bright, complex top on Operator 3, each level set independently in the mixer.

If you want to see where this lineage starts, our Yamaha DX7 spotlight covers the 1983 synth that made FM a household sound. miniFM is not an emulation of that instrument. It borrows its sonic territory and pairs it with the subtractive workflow of a 1970s monosynth, so you shape the FM source with a resonant filter and envelopes the way you would with an analogue synth.

Inside the miniFM engine

Harmonic Interpolation Synthesis

The headline technology is what Forever 89 calls the Harmonic Interpolation Synthesis Engine. In conventional FM, operator frequencies step through fixed ratios. Turn a ratio knob and the sound jumps from one harmonic relationship to the next, often passing through harsh, out-of-tune artefacts on the way. miniFM's operator frequencies move continuously instead, so the tone travels smoothly from harmonic to inharmonic and metallic without those unwanted artefacts.

For the producer, this changes what modulation can do. Sweeping an operator's Multiple with an LFO or the mod wheel becomes a usable gesture, a morph from a clean organ-like tone into a bell or gong, rather than a glitchy jump.

Operators and mixer

Each operator has four controls: Multiple (its harmonic), Detune, an FM amount (feedback on Operator 1, Op1 into Op2 on Operator 2, Op2 into Op3 on Operator 3) and a Volume in the filter mixer. The mixer adds a Stereo width control. Three digital character controls, Bit Depth, Samplerate and Anti-Alias, let you dial in grit deliberately. Pull the sample rate and bit depth down and you move towards lo-fi, early digital textures.

The filter

After the mixer comes a detailed emulation of a classic 1970s-inspired analogue low-pass filter, with Cutoff and Emphasis. Emphasis self-oscillates at its maximum setting of 100, so the filter can whistle or ping on its own. A Filter Overload LED shows when you are driving it; overload adds saturation and pulls the resonance back, so a hot mix thickens rather than screams. Running bright FM through a resonant low-pass is what gives miniFM its character: it tames the brittle top end that makes so many FM patches sound thin, and it gives you a familiar sweep to play with.

RP-8 reverb, applied per voice

The built-in RP-8 Reverb runs per voice rather than on the summed output. It has Decay, Size, Density and Mix. Modulating Size can create a Doppler effect, and Density ranges from a pure delay to a dense tail, at a higher CPU cost as you turn it up.

Modifiers, LFO and Flux

miniFM's modulation lives in a compact control panel that works as a matrix. The rows are Key, Velo, Wheel, LFO and Flux; the columns are Multiple, Detune, FM and Filter. Its knobs are dual-purpose, so a single gesture can adjust a parameter or introduce modulation. Want velocity to brighten the FM index and open the filter? That is two knobs on one row.

The LFO has Rate and a Mod Amount that adds the LFO to the modulation envelope. Flux is the more interesting source: a slow, per-voice random drift applied across all controls, with a global Flux Amount and per-destination scaling. At low settings it adds the subtle variation of an analogue instrument; turned up, Forever 89 describes it as approaching the richness of dozens of oscillators playing together.

Contours, voices and presets

Two ADSR Contours handle Modulation and Loudness. Polyphonic Mode switches between mono and 16-voice polyphony, and Glide covers portamento for basses and leads. On-screen Pitch and Mod controls sit beside the keyboard.

Presets load from a display navigated with a D-pad, with search by name. The Patch Map arranges presets in a continuous space, similar to the Map View in Topos, so you can move through the space between sounds. An infinite Random Patch Generator rounds things off, handy when you need a starting point rather than a finished sound.

Forever 89 miniFM specifications

SpecDetail
TypeThree-operator FM synthesizer
AlgorithmFixed: Op1 feedback, Op1 > Op2 > Op3, all three into the filter mix
EngineHarmonic Interpolation Synthesis (continuous operator frequencies)
Per operatorMultiple, Detune, FM amount, Volume
CharacterStereo width, Bit Depth, Samplerate, Anti-Alias
FilterEmulation of a classic 1970s-inspired analogue low-pass; Cutoff, Emphasis (self-oscillates), Overload
ReverbRP-8, per voice: Decay, Size, Density, Mix
ModulationMatrix: Key, Velo, Wheel, LFO, Flux into Multiple, Detune, FM, Filter
EnvelopesTwo ADSRs (Modulation, Loudness)
VoicesMono or 16-voice polyphony, Glide
PresetsName search, Patch Map, infinite Random Patch Generator
FormatsVST3, AU (64-bit)
SystemmacOS 10.13+ (Apple Silicon or Intel); Windows 10/11 with SSE3 and OpenGL 3.2+; 1 GB RAM minimum
LicenceOne-time purchase, no subscription, no dongle, works offline

miniFM vs Arturia DX7 V and Dexed

Forever 89 miniFMArturia DX7 VDexed
Price€79 intro to 17 Dec (€119 after)$149Free
ApproachThree operators, fixed algorithm, filter and reverb on one panelFull DX7 recreation with expanded operators and modern extrasSix-operator DX7 model with cartridge librarian
FormatsVST3, AUVST3, AU, AAXVST, AU, LV2, standalone
PlatformsmacOS, WindowsmacOS, WindowsmacOS, Windows, Linux
Pick it ifYou want FM you can program by hand, quicklyYou want the classic DX7 sound with modern depthYou want to load classic DX7 patches for nothing

Which to pick: Dexed and DX7 V are about the DX7 itself. Dexed is the obvious first stop if you want those cartridges and six-operator algorithms without spending anything, and DX7 V adds Arturia's expanded operators and modern extras for the classic sound. miniFM is a different proposition. It gives up operators and algorithm choice in exchange for a single-panel workflow, a resonant analogue-modelled filter, per-voice reverb and Flux drift, which makes it far quicker to program from scratch. If you are browsing the wider field of compact FM instruments, the vMEGAfm first look covers a very different, chip-based take on FM.

Who miniFM is for

Buy it if you like the sound of FM but have never enjoyed programming it. miniFM suits producers who want punchy FM basses, bells, keys and evolving pads they can build by hand, and sound designers who want a synth that responds to tweaking rather than menu navigation. The Harmonic Interpolation engine and the self-oscillating filter make it a strong performance instrument, and the mono mode with glide covers basslines and leads.

Skip it if you work in Pro Tools, need CLAP, or want a standalone app: miniFM ships as VST3 and AU only. Anyone who specifically wants classic DX7 patch compatibility or the full six-operator architecture is better served by Dexed or DX7 V.

How much does Forever 89 miniFM cost?

  • €79 introductory price until 17 December 2026, then €119 ($119 / €119 regular).
  • Forever 89 Bundle (miniFM, Visco and Topos): €159 until 17 December, then €199.
  • Visco is currently €99 (was €139) and Topos is €79 (was €99) if you want the other two separately.
  • Demo: fully functional and time-unlimited, with occasional reminders to purchase.
  • One-time purchase: no subscription, no dongle, works offline.

miniFM is sold direct from the Forever 89 shop.

Price-timing note: the €79 intro price runs until 17 December 2026, past Black Friday and Cyber Monday, so there is time to run the demo through a few sessions first. If you are weighing it against other instruments on sale this season, our synth plugin deals page tracks the current discounts.

FAQ

How much does miniFM cost?

€79 until 17 December 2026, then €119. The Forever 89 Bundle with Visco and Topos is €159 until 17 December, then €199.

How many operators does miniFM have?

Three, in one fixed algorithm: Operator 1 has feedback and modulates Operator 2, which modulates Operator 3, and all three feed the filter mixer.

Does miniFM run in Pro Tools?

No. miniFM is VST3 and AU only, with no AAX, CLAP or standalone version.

What are the system requirements?

macOS 10.13 or later on Apple Silicon or Intel, or Windows 10/11 with SSE3 and OpenGL 3.2 or later, plus at least 1 GB of RAM. Both are 64-bit.

Verdict

miniFM makes FM feel immediate. Three operators, a fixed algorithm and a single panel sound restrictive on paper, but the Harmonic Interpolation engine, the resonant filter and Flux give it far more range than the operator count suggests. Format support is the limitation, with VST3 and AU only. At €79 until 17 December, with a time-unlimited demo and no subscription, it is an easy recommendation for anyone who wants FM tones without FM homework. See the miniFM plugin page for specifications and pricing.